Wall Mount Garden Hose Reel
- Rugged aluminum-alloy construction.
- Configure for parallel or perpendicular installation.
- 100% drinking water safe plumbing.
- 6-1/2 ft. x 5/8-inch inlet hose included.
- 10-YEAR No-Leak, No-Fail Warranty.
- Patented design: Patents – Eley Hose Reels
- Frequently Asked Questions
Wall Plate Dimensions
Standard Capacity - Perpendicular
Standard Capacity - Parallel
Extra-Capacity - Perpendicular
Extra-Capacity - Parallel
This One Hose Reel Model Offers Two Directional Mounting Options
IMPORTANT. The configuration option on the product page simply shows the appearance difference between the parallel and perpendicular assemblies. Regardless of which configuration you order, you'll receive the SAME model, and the innovative ELEY-original design allows you to assemble the reel into EITHER configuration.
Wall Plate Attachment in Parallel Configuration
Assembled in the parallel configuration, the wall plate can be mounted in any position relative to the wall, including horizontal, vertical, or at a 45° angle. Because the reel is spinning and the hose is being pulled off alongside the wall, it doesn't matter what angle or direction the wall plate is attached to the wall. See diagram below for additional clarification.
ELEY® Polyurethane - Everything You've Been Wanting in a Garden Hose
100% Drinking Water Safe
5/8-Inch Full-Flow Fittings
"Loop-Flip" Kink-Resistant
Ultra-Lightweight
Lead-Free, Crush-Proof Brass Fittings
Tear, Cut & Puncture Resistant Cover
Latex-Free & Non-Marking Cover
Rated to 150 PSI & 165°F
Made in the USA!
10-Year, No-Fail Guarantee!
Model-Specific Features
Standard ELEY Hose Reel Features
Rugged Aluminum Construction
Our advanced aluminum alloy delivers the ideal combination of lightweight performance, superior strength, and corrosion resistance. Engineered with key elements like iron, copper, magnesium, silicon, and zinc, it’s significantly stronger and more durable than pure aluminum.
Durable Powder-Coat Finish
Our premium powder-coated finish is cured at 400°F to create a hard, smooth surface that resists fading, cracking, and peeling. The versatile Spartan Bronze color complements nearly any exterior, including siding, brick, stucco, stone, and wood.
Freeze-Resistant Brass Swivel
Delivering full 3/4-inch flow capacity, the innovative “no-kink” elbow design also includes smooth-spin ball bearings and revolutionary freeze resistance. Durable lead-free brass is 100% drinking water-safe and backed by a 10-year No-Leak, No-Fail guarantee.
Polyurethane Inlet Hose
Included with every wall-mount hose reel, the durable 6-1/2 foot x 5/8-inch ID full-flow feeder hose features an inside tube and outer cover made from ultra-strong and kink-resistant polyurethane material. Equipped with lead-free, crush-proof brass fittings, this inlet hose is also 100% drinking water safe.
Smooth-Spin Axle Bushings
Made from an ultra-durable material, ELEY axle bushings keep your reel spinning smoothly for years with no drag or binding. They also never need oil, grease, or any other lubricant, since they’re 100% maintenance-free for life.
Ergonomic Crank Handle
This teardrop-shaped, full-palm grip crank handle spins freely on a solid aluminum shaft and is made from an extreme-duty, high-impact material. Positioned near the outer edge of the reel’s flange, it provides greater leverage for faster, easier rewinding.
Stainless-Steel Fastners
No ELEY hose reel component will rust or break down over time, including the hardware used to assemble the reel. Made from high-grade stainless steel, our bolts, screws, and nuts provide years of corrosion-free performance.
Cam-Lever Brake
Easily turn the brake OFF & ON with one finger. Adjust braking strength to prevent unwanted hose rollout after you stop pulling from the reel. Flip the lever to OFF for smooth, free-spin rewinding.
Hose Strap Attachment
By securing the hose to the reel’s drum, this durable, canvas hose strap prevents damage to the hose fitting and the brass swivel when a fully extended hose is yanked on. The adjustable strap will secure any hose size up to 1” outside diameter.
10-Year No-Leak, No-Fail Guarantee & Warranty
How many products sold today will guarantee they'll perform just as reliably 10 years from now? ELEY makes that promise. The only reel brand to guarantee a full decade of rugged, reliable, no-leak, no-fail performance.
Wall-Mount Hose Reel Videos
Frequently Asked Questions - Wall Mount Reel
These FAQs are specific to the wall mount, model 1041. For general FAQs about all ELEY® reels, visit our Garden Hose Reels FAQs.
What is the size of the wall plate mounting hardware that comes with the reel?
The mounting hardware consists of four of each of the following:
- 1/4" x 2-1/2" Hex-Head, Stainless Steel Wood Lag Screws
- 5/16" x 1-3/4" Anchor Sleeves
What type of walls and surfaces can this reel be mounted?
Whether you want to install this wall mount garden hose reel to a masonry surface such as brick, cement, or cinder block or a wood frame surface such as siding, stucco, or Hardie Plank®, you'll find the answer to all of your questions in our How to Mount a Garden Hose Reel to a House article.
How deep do the wood lag screws need to penetrate the studs (or board) for adequate anchoring?
To securely anchor the wall-mount hose reel to a wood frame structure, the lag screws should penetrate the wood by at least 1-inch. The following linked article gives a more detailed explanation.
Can this reel be mounted to a flatbed trailer or vehicle?
No. ELEY garden hose reels are not designed to be mounted to a trailer, pickup bed, or any other type of over-the-road vehicle. Doing so will void the warranty and could cause structural failure that could lead to damage, serious injury, or worse.
What's the difference between Parallel and Perpendicular?
The ELEY wall-mount garden hose reel can be configured for EITHER parallel OR perpendicular. Assembled into the parallel configuration, the garden hose will pull off the reel alongside the wall, whereas the perpendicular configuration will pull the hose out straight away from the wall. You decide which configuration will work best for your application during assembly. The configuration you end up with depends on which of the two positions the reel's arm can be attached to the wall plate you choose.
Does this reel pivot or rotate in different directions?
No. This model can be configured and mounted in a fixed parallel or perpendicular direction. The reel can also be reconfigured in either direction at any time by changing the orientation of the arm's attachment to the wall plate. However, the mounting direction is fixed and does not offer a rotating or pivoting action.
Does the sharp bend in the brass swivel restrict water flow?
The change in the shape of the garden hose swivel gooseneck does have a theoretical impact on water flow, but it is so minimal that our digital flow meter with a resolution of 0.01 gallons per minute (GPM) and our pressure drop gauges cannot detect it
Once mounted, can the orientation of the hose reel be changed from parallel to perpendicular or vice versa?
Yes, this can be accomplished by changing the orientation of how the arm & axle assembly is attached to the wall plate. To do so, the wall plate will need to be removed from the wall since the two bolts that attach the arm to it are accessed from the backside of the wall plate. For masonry surfaces that use anchor sleeves, you'll need to re-insert the bolts into the holes slowly and gently to get the threads restarted into the cone-shaped nut inside the anchor sleeve so as not to dislodge it or get the threads out of alignment. We've done this many times during photo shoots. We first take photos of the reel in the parallel position, remove the wall plate, reattach the arm, and remount the hose reel onto the brick wall to get pictures of the perpendicular configuration.
What are the dimensions of the wall plate and mounting holes?
I have a question regarding the mounting and installation of this model.
Follow this link for more assembly and installation FAQs, downloadable PDF instruction manuals, and step-by-step assembly demonstration videos. Assembly Instructions - Wall Mount Hose Reels
Is assembly required?
Yes, however, don't let that scare you away. Quick and easy assembly was one of our R&D team's primary objectives when designing the durable ELEY hose reels. We provide an excellent assembly manual with the hose reel and full step-by-step video demonstrations of the assembly and installation on this website. Please visit our Assembly Instructions - Wall Mount Hose Reel page if you'd like to preview the manual and video.
Can the reel be removed from the wall for the winter without removing the wall plate?
Yes, the wall-mounted hose reel can be removed from the axle/wall plate without removing the mounting bracket. Please see the steps below.
1. Disconnect your hose from the brass swivel. (You will leave your hose on the reel for storage.)
2. Unthread the brass swivel from the axle of the reel by loosening the silver retaining nut from the axle by turning it counterclockwise.
3. Pull the swivel and about 6" of hose out the front side of the reel
4. Unthread the brass swivel from the inlet hose.
5. Slide the cam-lever brake off the axle.
6. Slide the hose reel off the axle and take it to your designated space for winter storage along with the swivel, brake, and inlet hose assembly.
I don't see my question in this list.
The FAQs on this page are specific to this model.
For more general FAQs that would pertain to all hose reel models, scan our General Hose Reel FAQs on the hose reel collection page.
